INTERNATIONAL TECHNICAL TRADING CO.,LTD  
BRAND NAME  

 

 
 
 

NON-AS JOINT SHEETS

 

General NON-AS Joint Sheet

 
Fig.No.
COMPRESSED
NON-ASBESTOS Sheet

Non-asbestos fiber mixed with heat/chemical resisting rubber binder, then rolled and vulcanized
Used as pipe flange and gasket for equipment in various industries
Temperature range:
-50 to +160 1)
If the gasket is used at temperature over 100 , consult the supplier.
Thickness:
0.4, 0.5, 0.8, 1.0, 1.2, 1.5, 1.6, 2.0, 3.0 3.2,mm
Dimension:
1270x1270;1270x3810;3048x3810mm


6500

NON-AS Joint Sheet for Equipment Pipes

 
Fig.No.

COMPRESSED
NON-ASBESTOS Sheet

Non-asbestos fiber, mixed with heat/chemical resisting rubber binder, then rolled and vulcanized.
Used as gasket for pipe flange and equipment in various industries Temperature range:
-50 to +200 1)
If the gasket is used at temperature over 100 , consult the supplier.
Thickness:
0.4, 0.5, 0.8, 1.0, 1.2, 1.5, 1.6, 2.0, 3.0, 3.2mm
Dimension:
1270x1270, 1270x3810, 3048x3810mm


6501

GASKETS

 

New VALFLON Gaskets

Fig.No.


NEW VALFLON Gasket

Gasket made of "NEW VALFLON" that provides improved creep resistance while maintaining PTFE's excellent characteristics of heat resistance, chemical resistance and adhesion resistance. Excellent heat cycle life ensures a longer gasket life.
Suitable for pipe flanges and units used in food and medicine processing that should avoid contamination with highly corrosive acid, halogen, solvent, oil gas and fluid.
Temperature limit:
-50 to +150
Thickness:
1.5, 3.0mm
Dimension:
1000x1000mm
1100x1100mm

7010-EX

Fig.No.

VALQUALON Sheet
PTFE, mixed with inorganic filler, then processed into sheet. Used as gasket for pipe flange, equipment, etc. which require chemical resistance or heat resistance, or which handle extremely low temperature, such as LNG, liquid nitrogen, liquid oxygen, ethylene. Not suitable for concentrated alkali.
Temperature limit:
- 200 to +200
Thickness:
1.0, 1.5, 2.0, 3.0mm
Max. outside diameter:
1270mm

7020

VALFLON Gaskets

Fig.No.

VALQUATEX Gasket
Rubber coated glass fiber fabric processed into a specified flat shape.
Used for combustion gas or exhaust gas duct, or undulated flange.
Temperature limit:
No.N214 : 400
No.N314 : 800
No. 214 : 400
No. 314 : 500
Since these gaskets do not have enough air-tightness, use them where some leakage is allowed

N214

SYNTHETIC RUBBER Gaskets

 
Fig.No.

SYNTHETIC RUBBER SHEET Gasket
No.2000 gasket processed into a specified flat shape
Used for low-pressure, such as cold water, hot water, sea water, and air
Thickness:
0.5, 0.8, 1.0, 1.5, 2.0, 3.0, 4.0, 5.0
Width:
1000mm
Length:
20 50M
Nominal Size:

Maximum OD 1000mm

2010

GLAND PACKING

 

VALFLON type

Fig.No.

PTFE Packing
Coil packing of PTFE yarn, processed by PTFE dispersion and braided into a square cross section
Resisting to almost all fluids. optimum as shaft seal for valves, handling corrosive fluid (MHLWÕs notices No.20 and No.370 applicable).
Temperature limit:
260
Thickness:
3 25mm
Length:
3m

7233

SPECIAL FIBER type

Fig.No.

ALAMID FIBER MIXED INORGANIC FIBER COIL Packing
Coil packing made of blended yarn of aramid fiber and artificial inorganic fiber treated with PTFE dispersion, braided into a square cross-section and finished with PTFE dispersion and lubricating oil.
On the conditions of use. ideal for a shaft seal for rotary pumps as an alternative to No.7132 for paper industry where black color should be avoided. It may also be used as s shaft seal for rotary equipment depending
Thickness:
3 25mm
Length:
3m

8132
Fig.No.

ALAMID/INORGANIC COIL Packing
Coil packing of blended alamid and artificial inorganic yarn, processed with PTFE dispersion and inorganic filler, then braided into square cross section and finished by PTFE dispersion
Used as shaft seal for general-purpose valves handling water and oily fluid.
Temperature limit;
260
Thickness:
3 25mm
Length:
3m

8133
Fig.No.

CORD SEALING TAPE SOFT
Free-size PTFE material, modified to soft and tough cord-type seal.
Used for parts where PTFE corrosion resistance is required, where the flange accuracy is low, or where fastening strength is insufficient.
7GS66A Cross section:
Ellipse (with adhesive)

 

7GS66A
Fig.No.

NON-ASBESTOS VALFLON ENVELOPE Gasket
Elastic core material such as compressed non-asbestos sheet, coated with PTFE of V-shaped cross section.
Used as gasket for pipe flange, tower, tank, and various equipment for corrosive liquid, such as acid, halogen, or for food, medicine, etc. for which fluid contamination should be avoided

 

 

7030

Fig.No.

CORD SEALING TAPE SOFT , BLACKTIGHT (basic design)
Spiral wound gasket using VALQUAFOIL tape applied as filler material
Free-size PTFE material

 

6950
 
<< Back           Next >>
 

Copyright © 2006 ITT Co., Ltd. All rights reserved.

home    l   about us   l   products   l   contact us